Hazardous chemicals transportation is a kind of special transportation and an indispensable category in modern logistics transportation industry. Only after being strictly reviewed by relevant departments and having corresponding facilities and equipment to ensure safety can it be qualified for hazardous chemicals transportation. With the continuous improvement of China's industrial development level and the increasing proportion of petrochemical industry in the economy, the demand for the transportation of dangerous chemicals is also higher and higher.

Generally speaking, if you want to engage in the transportation of dangerous chemicals, you need to have certain conditions, such as the road transportation certificate issued by the competent transportation department (which must be stamped with the special seal for road transportation of dangerous goods), the valid driving certificate issued by the public security vehicle management department, the valid tank quality inspection certificate issued by the quality and technical supervision department, the road transportation pass for highly toxic chemicals (transportation of highly toxic chemicals) Hang the dangerous transportation signs and signs issued by the transportation department as required.

Dangerous chemicals are different from ordinary goods. During transportation, they are more dangerous than other goods, such as flammable, explosive, toxic, corrosive, radioactive and other dangerous goods. In addition to using vehicles according to regulations, the transportation details also need the owner's special attention.

1. Loading.

(1) Vehicle inspection

In addition to the daily inspection of dangerous chemical vehicles, carefully check the details before departure, and pay attention to whether the vehicle signs are complete.

(2) Safety packaging

When transporting dangerous chemicals, safety packaging shall be done according to the type, time and distance of transportation, and clear, standardized and easily identifiable marks shall be made on the packaging.

(3) Standard loading

The loading of goods shall be standardized, and different goods shall not be confused. According to the nature of the hazardous chemicals contained, corresponding fire-fighting equipment and protective first-aid supplies shall be configured for emergency use. The automobile exhaust pipe shall be equipped with flame arrester, and the iron floor carriage shall also be paved with straw mat, etc.

2. Transportation.

(1) Select driving route

The transportation of dangerous chemicals shall be far away from towns and residential areas as far as possible, and shall not be driven on roads with complex road conditions. In hot weather, you can rest during the day and drive at night. In case of bad weather such as rain and snow, try to avoid driving. If inflammables are transported in case of moisture, tarpaulin and other rainproof facilities shall be prepared.

(2) During rest and parking

Avoid crowded places. If it is unavoidable, try to ensure that the vehicles are guarded and pedestrians are not allowed to approach to ensure safety.

(3) Standardized driving

When driving at high speed, the vehicle shall not exceed 80 kilometers, and the maximum speed shall not exceed the safety regulations. When driving on the road, the vehicle shall not exceed 80 kilometers. Pay attention to the safety regulations. When driving on the road, the vehicle shall not exceed the maximum speed.

Note that irrelevant personnel are not allowed to take the means of transport of dangerous chemicals.

(4) Frequent inspection on the way

Pay attention to check whether the goods are leaking and whether the packaging is damaged. In case of leakage irreparable by personal strength, it is necessary to quickly drive to the open area and stay away from the crowd and water source. Especially on the highway, it is necessary to quickly move the vehicle to the emergency stop zone, set up a warning area, and immediately call the police to explain the situation.

3. End of transportation.

(1) Unload with care to prevent contamination

Dangerous chemicals are easy to pollute the environment, especially liquids, especially land and water sources. After long-distance transportation, the safety packaging may be worn, so we must pay attention to it when unloading.

(2) Cleaning and disinfection

After the transportation is completed, it shall be cleaned and disinfected in time. During cleaning and disinfection, attention shall be paid to the nature of dangerous goods, and the knowledge of cleaning and disinfection methods shall be mastered to prevent pollution, cross reaction or poisoning.

The transportation of dangerous chemicals has more strict requirements for vehicle stability, earthquake resistance and other performance. Generally, the whole vehicle needs to be equipped with ABS system. Therefore, in the selection of accessories, products with better safety performance must also be selected. Here I recommend Darong disc axle to you. As an old brand that has entered the market for more than 20 years, its strength and performance are trustworthy, especially the leading progress has been made in the "one-piece" shaft casting process.

Darong disc axle has sensitive braking, stable and uniform output, fast heat dissipation and is not prone to thermal attenuation. The braking force recovers rapidly after wading, which can greatly avoid or reduce accidents caused by uneven braking force distribution, slow brake heat dissipation and other factors. When used in combination with hydraulic retarder and ABS system, it can prevent wheel locking in case of emergency braking and make the vehicle stop smoothly in the shortest braking distance, Provide higher safety guarantee for the transportation of dangerous chemicals. At present, Darong disc axle has five tonnage of 10t, 13T, 16t, 20t and 25t, and special dimensions can be customized.